Digital Clamp meter

WARNING

In order to avoid possible electric shock or personal injury and other safety accidents, please abide by the following specifications

1. Please read this manual carefully

2. Use the instrument strictly according to this instruction, otherwise the protection function provided by the instrument may be damaged or weakened.

3. Please be careful if the measurement exceeds 30V AC true RMS, 42V AC peak or 60V DC. There may be danger of electric shock at this kind of voltage.

4. Voltage applied between terminals or between each terminal and grounding point shall not exceed the rated

1   value.

1. By measuring the known voltage to check whether the meter work is normal, if it is not normal or damaged, do not use it again

2. Before using the instrument, please check whether there are cracks in the instrument shell or plastic parts damaged. If so, please do not use again.

3. Before using the instrument, please check whether the probe is cracked or damaged. If so, please replace the same type and the same electrical specifications

4. Do not exceed the lowest rated Category of Measurement (CAT) rating in products, probes or accessories

5. Do not measure the current when the probe is inserted into the input jack

6. Don't work alone

7. Please comply with local and national safety code. Wear personal protection equipment (such as approved rubber gloves, masks and flame retardant clothes, etc.) to prevent being damaged by electric shock and electric arc due to exposed hazardous live conductor

8. When it shows low battery indicator, please replace the

2  battery in time in case of any measurement error

1. Do not use the instrument around explosive gas, steam or in wet environment.

2. When using the probe, please put your fingers behind the finger protector of the probe

3. When measuring, please connect the neutral wire or the ground wire firstly, then connect the live wire; When disconnecting, please disconnect the live wire firstly, then disconnect the neutral wire and ground wire

4. Before opening the outer cabinet or battery cover, please remove the probe on the instrument. Do not use the instrument in the circumstances that the instrument is taken apart or battery cover is opened

5. It only meets the safety standards when the instrument is used together with the supplied probe. If the probe is damaged and needs to replace, the probe with same model number and same electrica